The safe functioning of wallboxes is essential, whether during initial connection to the power supply or during recurring tests, in order to avoid follow-up costs and safety risks. The Wiha wallbox measuring adapter, together with the installation tester, supports the fast, safe, and standardized testing of wallboxes directly via the station's type 2 connection, so there is no need for time-consuming reconnections. The slide switch can be used to simulate the actual vehicle conditions of the control pilot: from A – “Vehicle not connected” to B –“Vehicle connected, not ready for charging” to C – “Electric vehicle connected, ready for charging, ventilation not required”. In addition, the CP error “E” is simulated so that a comprehensive diagnosis of the wallbox can be carried out in accordance with VDE specifications. The integrated LED display provides clear feedback at all times on whether the device is ready for charging and the charging phase, even without an installation tester for a quick check. In combination with the Wiha installation tester, typical measurements can be carried out, such as voltage, frequency, phase sequence, various RCD tests (also for EV RCDs with 6mA DC fault currents), insulation resistance, low-resistance measurements, line and loop impedance.The slide switch can be used to simulate the actual vehicle conditions of the control pilot: from A – “Vehicle not connected” to B –“Vehicle connected, not ready for charging” to C – “Electric vehicle connected, ready for charging, ventilation not required”. In addition, the CP error “E” is simulated so that a comprehensive diagnosis of the wall mounted charging equipment can be carried out in accordance with VDE specifications. The integrated LED display provides clear feedback at all times on whether the device is ready for charging and the charging phase, even without an installation tester for a quick check. In combination with the Wiha installation tester, typical measurements can be carried out, such as voltage, frequency, phase sequence, various RCD tests (also for EV RCDs with 6mA DC fault currents), insulation resistance, low-resistance measurements, line and loop impedance.

260x100x80 mm (LxWxD)

Safety and functional testing in accordance with DIN VDE 0100-600 (IEC 60364-6) and DIN VDE 0105-100 (EN 50110) for wall mounted charging equipment in accordance with DIN VDE 0122-1 (IEC 61851-1).

Use with the Wiha installation tester.

Wiha Werkzeuge GmbH is certified according to ISO 9001:2015, ISO 14001:2015 and ISO 50001:2018 and confirms that its products comply with internal regulations, operating instructions as well as applicable norms, standards and legal requirements and are subject to continuous process monitoring. The product complies with the requirements of Regulation (EU) 2017/821 on conflict minerals as well as the OECD Due Diligence Guidance, the General Product Safety Regulation (GPSR), Regulation (EC) No 1907/2008 (REACH), whereby the latest SVHC Candidate List is regularly reviewed and requirements are implemented, Directive 2011/65/EU (RoHS) including amendment (EU) 2015/863 as well as Regulation (EU) 2019/1021 on persistent organic pollutants (POP).

For functional and safety testing of charging stations (wall mounted charging equipment) in the area of electromobility.