PAT device tester

Accuracy of RCD/PRCD trip time measurement

± (5% + 2 Digit)

Accuracy of differential current measurement (protective conductor current measurement)

± (5% + 2 Digit)

Accuracy of insulation resistance (Riso)

± (5% + 2 Digit)

Accuracy of protective conductor current measurement with active 3-phase adapter

± (5% + 2 Digit)

Accuracy of protective conductor resistance (Rpe)

± (5% + 2 Digit)

Accuracy of substitute leakage current (IEA)

± (5% + 2 Digit)

Accuracy of touch current

± (5% + 2 Digit)

Accuracy of voltage test on protective contact sockets

± (5% + 2 Digit)

Additional error for differential current measurement (protective conductor current measurement) with non-sinusoidal power supply

0,004

Additional error of touch current with non-sinusoidal power supply

0,031

Automatic power off (APO)

After 2 minutes of inactivity

Backup battery for real-time clock (RTC)

CR 2032

Device weight incl. batteries, without accessories

990 g

Display backlight

White (standard), green (PASS), red (FAIL), brightness is automatically controlled via light sensor

Function selection

Rotary switch with LED indicator, incl. backlit symbols around the rotary switch

Function test of voltage test on protective contact sockets

5 V - 270 V AC

Length (mm)

255 mm

Limit values of RCD/PRCD trip time measurement (preset)

30 mA: 300 ms, 150 mA: 40 ms

Limit values of differential current measurement (protective conductor current measurement) (preset)

3.5 mA (protection class I)

Limit values of insulation resistance (Riso) (preset)

Protection class I: 1 MΩ, protection class II: 2 MΩ

Limit values of protective conductor current measurement with active 3-phase adapter (preset)

3,5 mA

Limit values of protective conductor resistance (Rpe) (preset)

≤ 0.3 Ω (− cable length 5 m)

Limit values of substitute leakage current (IEA) (preset)

Protection class I: 3.5 mA, protection class II: 0.5 mA

Limit values of touch current (preset)

0.5 mA (protection class II)

Mains operation

230 V AC, 50 Hz

Max. lamp load for differential current measurement (protective conductor current measurement)

1000 W

Max. measurement time for differential current measurement (protective conductor current measurement)

30 sec

Max. measurement time of touch current

30 sec

Max. operating altitude

Up to 2,000 m above sea level

Max. switching capacity for differential current measurement (protective conductor current measurement)

3000 VA

Measuring current of insulation resistance (Riso)

> 1 mA, < 2 mA at 2 kΩ

Measuring range of RCD/PRCD trip time measurement

10 ms - 500 ms

Measuring range of differential current measurement (protective conductor current measurement)

0,1 mA - 19,99 mA

Measuring range of insulation resistance (Riso)

0,1 MΩ - 19,99 MΩ

Measuring range of protective conductor current measurement with active 3-phase adapter

0,25 mA - 9,99 mA

Measuring range of protective conductor resistance (Rpe)

0,05 Ω - 19,99 Ω

Measuring range of substitute leakage current (IEA)

0,2 mA - 19,99 mA

Measuring range of touch current

0,1 mA - 19,99 mA

Memory

Up to 1,500 measurement results

Open-circuit voltage of protective conductor resistance (Rpe)

< 5 V

Operating temperature min - max (°C) PAT

0 to 30 °C (up to 80% relative humidity)

Overvoltage protection for differential current measurement (protective conductor current measurement)

- max. 276 V

Overvoltage protection of touch current

- max. 276 V

Power supply

6 x 1,5 V IEC LR06 (AA)

Rated current for differential current measurement (protective conductor current measurement)

16 A

Rated current of protective conductor current measurement with active 3-phase adapter

16 A

Rated current of touch current

16 A

Resolution of RCD/PRCD trip time measurement

1 ms

Resolution of differential current measurement (protective conductor current measurement)

0,01 mA

Resolution of insulation resistance (Riso)

0,1 MΩ

Resolution of protective conductor current measurement with active 3-phase adapter

0,01 mA

Resolution of protective conductor resistance (Rpe)

0,01 Ω

Resolution of substitute leakage current (IEA)

0,01 mA

Resolution of touch current

0,01 mA

Resolution of voltage test on protective contact sockets

1 V

Sets / individual items

Sets

Storage temperature min - max (°C) PAT

-25 to 65 °C (up to 80% relative humidity)

Testable electrical equipment

Devices of protection class I, II, extension leads / cable reels, USB devices

Test current / polarity for RCD/PRCD trip time measurement

30 mA, 150 mA

Test current of protective conductor resistance (Rpe)

200 mA / 2 Ω

Test current of substitute leakage current (IEA)

< 10 mA at 2 kΩ

Test voltage for differential current measurement (protective conductor current measurement)

230 V ±10%

Test voltage of insulation resistance (Riso)

250 V/DC or 500 V/DC (+20%, -0%)

Test voltage of protective conductor current measurement with active 3-phase adapter

3 x 400 V ± 10%

Test voltage of substitute leakage current (IEA)

40 V/AC, 50 Hz

Test voltage of touch current

230 V ±10%

Top seller

Yes

Voltage test indication on protective contact sockets

L-N, L-PE, N-PE

Remove All Filters

Open tool case with pliers, screwdrivers, and electronic device inside

A person holds a smartphone next to a charging device on a table, with cables connected.

Device tester set PAT one

with tools and accessories (EU) in a case

Pr. number: 47220

€1,631.94 *

Device tester set PAT one

with tools and accessories (UK) in a case

Pr. number: 47221

€1,631.94 *

Black tool bag with a multimeter and cables partially visible inside

Device tester set PAT one

with accessories (UK) in a bag

Pr. number: 47223

€1,230.01 *

Black tool bag with cables and a yellow-red digital multimeter beside it.

Device tester set PAT one

with accessories (EU) in a bag

Pr. number: 47222

€1,230.01 *